Features and Benefits:

• 16-Gauge steel capacity
• Sure one-handed control
• Adjustable head angle
• Cutting applications in automotive grade sheet steel include trunk pans and floor boards
• Long lasting blades are easy to replace

This TurboShear combines an aluminum cast shear head and compact pneumatic motor housing for outstanding accessibility and one-hand control at air speed. The shear head may also be safely gripped for additional support. A helical shaped foot permits easy left, right or straight cuts, and a 5-position head accesses cuts through profiles and into tight spaces. Clearance between the shear's cutting inserts may be adjusted as necessary for optimal performance in 16 to 26-gauge (1.52 - 0.46 mm) steel. The four-sided cutting inserts are designed to be rotated to maximize service life before replacement. Insert cutting life is rated at 1,200-ft (365.76 m) in 16-gauge (1.52 mm) steel using four edges of inserts. Cutting life increases dramatically when averaged over cuts in a variety of steel thicknesses. Inserts are accessible without disassembly of shear head and are easily replaced on the job.